SKU: BET606B500
Betco 606B500 Untouchable With SRT Floor Finish
$214.44
EA
(No reviews yet)
Write a Review
- Superior protection for your floor
- Superior resistance to black heel marks
- Extremely low odor
- Self-sealing for high effectiveness
- Easy to apply
Untouchable with Scuff-Resistant Technology (SRT) is a low-odor, black heel mark-resistant floor finish that is an exceptional choice for those who want the highest gloss and wear with the least amount of labor. This low-maintenance floor finish is nonscuffing, durable, detergent-resistant and maintains its high gloss with minimal burnishing - a real labor saver. Excellent leveling and low odor make it easy to apply. It dries in 20 to 30 minutes. Untouchable is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
General Information
Manufacturer:Betco Corporation
Manufacturer Part Number:606B500
Brand Name:Betco
Product Line:Untouchable
Product Name:Untouchable With SRT Floor Finish
Marketing Information:
Packaged Quantity:1 Each
Product Type:Floor Finish
Product Information
Cleaner Type:Liquid
Cleaner Volume:640 fl oz (20 quart)
Scent:Mild
Composition:
pH:8.1 - 8.9
Directions/Instructions:Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
Application/Usage:
Features:
Physical Characteristics
Product Color:White
Miscellaneous
Recycled:No
Assembly Required:No
Country of Origin:United States
Manufacturer:Betco Corporation
Manufacturer Part Number:606B500
Brand Name:Betco
Product Line:Untouchable
Product Name:Untouchable With SRT Floor Finish
Marketing Information:
Untouchable with Scuff-Resistant Technology (SRT) is a low-odor, black heel mark-resistant floor finish that is an exceptional choice for those who want the highest gloss and wear with the least amount of labor. This low-maintenance floor finish is nonscuffing, durable, detergent-resistant and maintains its high gloss with minimal burnishing - a real labor saver. Excellent leveling and low odor make it easy to apply. It dries in 20 to 30 minutes. Untouchable is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
Packaged Quantity:1 Each
Product Type:Floor Finish
Product Information
Cleaner Type:Liquid
Cleaner Volume:640 fl oz (20 quart)
Scent:Mild
Composition:
- Water
- Acrylic Polymer
- Ethoxydiglycol
- Tributoxyethyl Phosphate
- Wax
- Glycol Ether
- C12-15 Alcohols Ethoxylated
- Siloxane
- Methylchloroisothiazolinone
- Methylisothiazolinone
- Partially Fluorinated Alcohol Surfactant
- 1,4-dioxane
pH:8.1 - 8.9
Directions/Instructions:Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
Application/Usage:
- Floor
- Hard Surface
- Tile
Features:
- Self-sealing
- Non-scuffing
- Scuff Resistant
- Low Odor
- Black Mark Resistant
- Durable
- Detergent Resistant
Physical Characteristics
Product Color:White
Miscellaneous
Recycled:No
Assembly Required:No
Country of Origin:United States
